mp3sirena

Instructions. Musical Siren V.8

Instructions

Instructions. Musical Siren V.8

Musical siren for car alarms is designed to replace standard car alarm sounds when warning signals are given. The siren is installed to replace the speaker of your car alarm.

Musical siren has 3 channel for work:

– channel 1 (CHEESE) – main channel for working with alarms

– channel 2 (BUTTON) – additional channel for connecting a button

– channel 3 (SENSOR) – additional channel for connecting a reverse signal or other sensors.

The device can contain up to 80 different sounds, which can be used for the main and additional channels. For the main channel, all sounds are conditionally divided into 3 recruitment. The working set selection can be changed using the button (cm. below ).

Initially, All 80 sounds are already recorded in the siren ( sirens, signals, voice warnings, etc.), That's why, upon purchase, the siren is completely ready for operation. Moreover, there is the possibility of additional settings via a computer, tablet , phone with any operating system. To do this, use a connection to the device’s Wi-Fi network. This makes it possible to reassign sounds to any event., sound volume adjustment, change of operating modes, etc..

Musical siren. MP3 files

When connecting the device to a computer's USB port, an additional disk with sound files will appear in the system. They are written to the device’s memory by simply copying them to a flash drive.. All files must be located in the directory “01” and have names 001.mp3, 002.mp3….080.mp3.

To enter the additional settings mode, you must press the button 10 once ( a beep will sound). After this, you need to connect to the appeared WI-FI network under the name MSxxxxxxxxx with the password “12345678” . Using any browser, open the page mp3siren.local and make additional system settings.

Pressing the button more 5 times allows you to select a working set of sounds for the main channel:

  • – 6 button presses selects work set No. 1
  • – 7 button presses selects work set No. 2
  • – 8 button presses selects work set No. 3
  • – 9 pressing the button selects the mode of cyclic selection of sets No. 1, 2, 3.

When connecting the device to a computer's USB port, an additional disk will appear in the system, sound files are written to the device’s memory by simply copying it to a flash drive. All files must be located in catalog “01” and have names 001.mp3, 002.mp3,… 080.mp3.

Connecting a musical siren

Default MP3 binding

Add-ons

Default MP3 binding (V.8)

Канал Чирпы MP3- файлы в наборах Описание
№ 1 № 2 № 3
CHEESE 1 короткий 001 021 041 Зависит от сигнализации (постановка на охрану *)
CHEESE 2 коротких 002 022 042 Зависит от сигнализации ( disarming *)
CHEESE 3 коротких 003 023 043 Зависит от сигнализации ( сработал режим предупреждения *)
CHEESE 4 коротких 004 024 044 Зависит от сигнализации ( зафиксированы попытки проникновения *)
CHEESE 5 коротких 005 025 045 Зависит от сигнализации ( сработал режим предупреждения *)
CHEESE 6 коротких 006 026 046 Зависит от сигнализации
CHEESE 7 коротких 007 027 047 Зависит от сигнализации
CHEESE Длинный первый чирп 008 028 048 Длительность первого чирпа более 400мс
CHEESE Короткие и длинные 009 029 049 Неопределённый набор сигналов / прерывистая тревога
CHEESE Непрерывный сигнал 010 030 050 Сигнал сирены, сработка режима тревоги*
CHEESE Доп-ные чирпы после постановки на охрану (10 сек.) 011-020 031-040 051-060 for instance, при выборе первого набора 3-6 чирпов после постановки в течение 10 Sec. соответствуют файлам 013.mp3 – 016.Mp3 ( открыта дверь, капот, багажник при постановке на охрану *)
BUTTON Нажатие на кнопку (1 -5once) 061-065 Подача звуковых сигналов №№ 1-5
SENSOR Сработка датчика 066 Подача звукового сигнала для датчика( задний ход)
Любой Любые 067-080 Дполнительные звуковые файлы
* – наиболее распространённый вариант

Instructions. PK3 Programmable Horn

Instructions

Instructions. PK3 Programmable Horn

PK3 Programmable Horn″ is a device for serving warning, Heads, emergency and any other sound signals and phrases from the car, motorcycle, boats, etc.. d. .It is possible to use it as an additional horn in transport.

The base of the uploaded sounds – 100 + 3. At any time you have the opportunity to reproduce 6 various signals- 3 By pressing the corresponding buttons, And yet 3, Holding the Shift button.

Remote control pk3

Signals are accompanied by a burning indicator.
3 of 6 signals can be redefined by you at any time.  For this, it is necessary to enter the configuration mode – Simultaneous pressing Shift buttons + 1 +2+3. There will be confirmation of the entrance 3 short flashes of the indicator. Here you need to select the desired signal – By pressing the buttons 1 and 3 you can sequentially sort the signals from the Bank of Sounds (Back and forth).When the necessary signal is selected, click the SHIFT button to confirm (4 short flashes of the indicator). After that, by click, select which of the buttons 1-3 This signal is assigned and also confirm the input by the pressure of the Shift button. 5 short flashes of the indicator signaling the successful recording of a new sound.

Structurally, the device consists of two parts – control panel with controller, and a horn with a control unit and an amplifier. Power is supplied to wires, emerging from the mouthpiece (as usual, Red +12V, black – weight). Connecting the plus of power must be done after the ignition lock. It is necessary to use an additional fuse in this circuit.
For the convenience of installing, all connections between blocks are carried out using connectors.

Connection programmable horn PK3

The Bank of Sounds is stored in the electronic memory of the device, If necessary, you can upload your sounds. File format - mp3 with names 001.mp3 – 100.Mp3. 5 additional, “not programmable” signals – These are files 101.mp3 – 105.Mp3.  All files should be in the catalog with the name “01”. The load of its files and editing the list of sounds is made using a USB cable, In this case, the device is defined as a drive ( Flashka).

Shopping Cart